Manufacturing Services

Air/Water Pressure Tanks

pressure2

Available in the following sizes:

100 Litres (22 gal.) – 170 PSI
218 Litres (48 gal.) – 140 PSI
227 Litres (50 gal.) – 170 PSI
318 Litres (70 gal.) – 140 PSI
318 Litres (70 gal.) – 270 PSI
409 Litres (90 gal.) – 140 PSI
427 Litres (94 gal.) – 155 PSI
100 Litres (22 gal.) – 170 PSI sandtrap

Pastry Brakes

Model 610 EC Computer Controlled Dough Sheeter (roller width 610mm)
610ec

Features Include;

  • Up to 20 different recipes
  • Four programs to each recipe
  • 50 separate programs possible
  • Allan Bradley Panelview 700™
  • Touch screen technology
  • Programable for each individual program
  • Either manual or automatic programing
  • Belt speed individually programable
  • This alleviates any stretching to the product
  • All stainless steel construction
  • Hard chrome 138mm diameter rollers
  • Six speed. Fully programable flour sifter able to be programed for any pass
  • Remote magic eye sensors allow for no flour build-up

Technical Data;

  • Width Of Conveyor Belts – 600mm
  • Length of tables – 1500mm each side
  • Roller width – 610mm
  • Maximum roller opening – 75mm
  • Maximum clearance of safety guard – 110mm
  • Roller speed 10mtr/min – 70 meters per minute

Bench Model 500 Table Top Tray Model – Features Include
pastrybrake

  • Roller opening 40mm – Roller surface speed 14.25 metres
    per minute.
  • 63mm diameter rollers – Removable scrapers – Fully
    enclosed drive system.
  • Rise and fall guard / switching system.
  • Depressing the guard on the entry side starts the motor and
    allows full access to the exit side starts the motor and
    allows full access to the exit side to clear pastry from the
    rollers.
  • Also available as a hand operated machine.

Model 760 Semi Automatic Dough Sheeter

Features Include

  • Large diameter (136mm) hard chrome rollers – 62mm
    opening.
  • Proven heavy duty worm gearbox.
  • Accurate wide scale thickness indicator – Ammeraal belts.
  • Swivelling catch trays.

Model 800EC Computer Controlled Dough Sheeter

Features Include

  • Available with 510mm wide rollers and 550mm wide rollers.
    Tray lengths can be changed to customers requirements.
  • Large roller opening 65mm – Roller diameter 110mm. Roller
    surface speed 14.5 metres per minute – Oil bath gearbox
    lubrication.
  • Fold down stainless steel trays – tray length extended 1.8
    metres.
  • Rise and fall guard / switching system.
  • Depressing the guard on the side starts the motor and
    allows full access to the exit side to clear pastry from the
    rollers.

Technical Data

  • Width of conveyor belts – 800mm Length of tables –
    2600mm each side
  • Roller width – 800mm Maximum roller opening – 75mm
  • Maximum clearance of safety guard – 110mm
  • Roller speed 10mtr/min – 70 metres per minute

Cromec Soiler Sander

Cromec Soiler Sander

This machine performs well with both sieved soil and sand, even slightly damp. As the product leaves the machine only 150mm above the surface, wind problems are minimised.

Hopper Capacity:
1.0 cu.m Heaped – Hopper has centrally mounted mixer to prevent bridging.

Distribution Rate:
Varible through 2 speed toothed belt system together with spring-loaded feed roller
0.5 – 4kg plus per sqm – 1.5m spread width 1.8m wide brush set hopper mounted.

Towing:
Can be towed by a wide range of light vehicles.
Turf tyres 240 wide do not mark the surface.

Site demonstrations or DVD’s available.
Contact: Bernie King, Ph(06) 278 4185 or email bernie.king@crouchers.co.nz

Golf Hole Groomers

golf hole groomer

This precision golf hole grooming tool is exported to Australia, Europe, United Kingdom and the United States of America.

Greens superintendents in these countries have reported to our distributors significant savings in greens maintenance costs together with extended playing life of the holes and improved green presentation.

Even on courses where new pin placements are on a daily basis, the hole is groomed to remove any minor imperfection caused during cup placement.

NZ PAT 513315
GB PAT 2394201
USA PAT 7,210,539

Golf Promotion – PDF Download
Owners Manual – PDF Download

Cromec Bearing Housings

bearing housing

We manufacture a range of housings as a standard stock unit. These are produced in Cast Iron & include:
FC509, FC517, FC510, FC518, FC511, FC520, FC513, FC522, FC515, FC516
SB506, SB515, SB508, SB520, SB509, SB522, SB510, SB511, SB513
TH509, TH520, TH510, TH522, TH511, TH513, TH515, TH517

We also produce a range of metric series & include:
FCM509, FCM518, FCM510, FCM520, FCM511, FCM522, FCM513, FCM515, FCM517

Included are the “A” & “B” Covers for each housing.

In the Specials range we can produce:

WB526 FS (Felt Seal)
WB526 LS (Labyrinth Seal)
WB528 FS WB532 FS
WB528 LS WB532 LS

Flingers to go with LS units.
Cast iron or SG Iron as required.

We have the ability to organise patterns, Castings & materials as required.

Our foundries are able to produce:
SG Iron, Cast iron, Steel, Stainless Steel & Other materials as required.

Hot Water Tank Stands

hot water stand

Contact Us

Manufacturing Services enquiries

contact – Mike Savage
Phone: 027 277 6517
Email: mike.savage@crouchers.co.nz

Croucher and Crowders Logo